High Alloy Materials
    Inconel Alloy 718

    INCONEL® 718

    ASTM B637, B 670, B 906
    UNS Number N07718
    NACE MR-01-75

    Other common names: Alloy 718, Haynes® 718, Nicrofer® 5219, Allvac® 718, Altemp® 718

    Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.


    Inconel 718 Round BarIn what forms is Inconel 718 Available at Haohua Industry?


    What are the characteristics of Inconel 718?

    Good mechanical properties – tensile, fatigue and creep-rupture
    Yield tensile strength, creep, and rupture strength properties are exceedingly high
    Highly resistant to chloride and sulfide stress corrosion cracking
    Resistant to aqueous corrosion and chloride ion stress corrosion cracking
    High temperature resistant
    Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
    Excellent welding characteristics, resistant to postweld age cracking

    Chemical Composition, %

    Ni Fe Cr Cu Mo Nb C Mn
    50.00-55.00 Remainder 17.00-21.00 .30 max 2.80-3.30 4.75-5.50 .08 max .35 max
    P S Si Ti Al Co B  
    .015 max .015 max .35 max .65-1.15 .20-.80 1.00 max .006 max  


    In what applications is Inconel 718 used?

    Chemical processing
    Liquid fuel rocket motor components
    Pollution-control equipment
    Nuclear reactors
    Cryogenic storage tanks
    Valves, fasteners, springs, mandrels, tubing hangers
    Well head completion equipment and blow out preventers (BOP’s)
    Gas turbine engine parts

    ASTM Specifications

    Sheet/Plate Bar Wire
    B670 B637 -


    Mechanical Properties
    Typical room temperature properties, 1800°F annealed condition

    Ultimate Tensile Strength, psi .2% Yield Strength psi Elongation % Hardness Rockwell B
    135,000 70,000 45 100


    Friendly link: Stainless coils tubing | Titanium Alloy steel pipes | U tubes | Finned tubes | Ferritic Stainless Steel Pipes | Duplex Stainless steel pipes | Austenitic stainless steel pipes | Nickel Alloy steel pipes |
    Tel: 0086-512-58220050 Fax:0086-512-58810865 E-mail: sales@haopipe.com
    Add: No.17,Southeastern Avenue, Economic Development Zone (South Area),Zhangjiagang City, Jiangsu Province, China.